Laser Screeding Machine

CONGLORY's scarifier removes difficult coatings such as glue, rubber, thermal plastic and other coatings on concrete and asphalt surface. With a shaving function on the same machine, it removes almost everything.

CONGLORY CB1-8E4 is a self-propelled shot blasting machine with permanent magnet motor and touchscreen control, ideal for coating removal, concrete profiling, and surface preparation on small to medium jobs.

All machine are made by XINGYI. Floor heavy grinders made by Xingyi use horizontally rotating discs to perform light texturing to open the pores of the surface, to the removal of paints and coatings.  All machine with single head, double heads or four heads, without or with speed adjustable perfect for aggressive grinding.

All machine are made by XINGYI. Floor heavy grinders made by Xingyi use horizontally rotating discs to perform light texturing to open the pores of the surface, to the removal of paints and coatings.  All machine with single head, double heads or four heads, without or with speed adjustable perfect for aggressive grinding.

All machine are made by XINGYI. Floor heavy grinders made by Xingyi use horizontally rotating discs to perform light texturing to open the pores of the surface, to the removal of paints and coatings.  All machine with single head, double heads or four heads, without or with speed adjustable perfect for aggressive grinding.

The composition can be disassembled, easy to transport on the road, installed and later maintained. The machine uses world-renowned brand components, including motors, switches and operating parts.

The HTG-550 is a powerful planetary grinder with three counter-rotating grinding heads. Its working width is 490 mm. The HTG-550 terrazzo floor grinder equipped with a water tank made of stainless steel, which can be filled with 15 liters of water.

A large number of steel shot are accelerated by the centrifugal force of the shot blasting machine and impact  the ground that needs to be treated. After the steel abrasive hits the surface,  rebound and the negative pressure from the matching vacuum cleaner will help the steel abrasives to form a cycle inside the machine . Dust and contaminants are removed by an air wash separator and are removed to a dedicated   dust collector. This makes the process almost dust-free in operation.